Error Detected May 1, 2026
Error Code

Bertazzoni Ranges Error Code F3

Error code F3 on Bertazzoni ranges indicates a sensor or temperature detection malfunction in the oven control system. This error prevents normal oven operation and requires troubleshooting to restore functionality.

Book a Repair Ask an Expert
Quick Diagnostics
Signs 6 identified
Possible Causes 8 listed
Safety Checks 9 steps
If unsure, stop using the appliance and contact a certified technician immediately.
What you notice

Signs

6
  • 01
    • Oven fails to heat or maintain temperature
  • 02
    • Error code F3 appears on the digital display
  • 03
    • Oven burners may not ignite or respond to controls
  • 04
    • Control panel becomes unresponsive to temperature adjustments
  • 05
    • Oven cycles on and off unexpectedly
  • 06
    • Cooking times are inconsistent or excessive
Why it happens

Possible Causes

8
A
• Defective oven temperature sensor (RTD probe or thermistor)
B
• Loose or corroded electrical connections at the sensor
C
• Damaged wiring harness between sensor and control board
D
• Malfunctioning electronic control board (120V/240V power regulation issue)
E
• Sensor probe positioned incorrectly or making poor contact
F
• Power surge or voltage fluctuation affecting sensor circuit
G
• Grease or debris accumulation on sensor components
H
• Failed relay on the control board responsible for oven heating circuits
DIY — No disassembly

Safety Checks You Can Do

9
  1. 1
    • Check your home circuit breaker panel and reset any tripped breakers supplying the range (typically 40-50 amp for 240V models)
  2. 2
    • Allow the range to cool completely for at least 30 minutes before retrying operation
  3. 3
    • Turn off the circuit breaker to the range for 60 seconds, then switch it back on to perform a complete system reset
  4. 4
    • Ensure the oven cavity is clean and free of food debris, grease, and moisture that could interfere with sensors
  5. 5
    • Verify the cooktop surface is completely dry and clean if using burners
  6. 6
    • Check that cookware is removed from the oven interior
  7. 7
    • Confirm the control panel display is functioning and showing other settings correctly
  8. 8
    • Wait 5 minutes after power reset before attempting to use the oven again
  9. 9
    • Do NOT attempt to disassemble the range or remove the sensor yourself; contact a qualified Bertazzoni service technician for further diagnosis
Always unplug the appliance before performing any physical check. These are visual/external checks only.
Still having trouble?

Our certified technicians diagnose and fix this error code permanently.

Schedule a Repair Call Us Now