Error Detected May 1, 2026
Error Code

Bertazzoni Ranges Error Code E1

Error code E1 on Bertazzoni ranges indicates a sensor malfunction or temperature detection failure in the oven. This error prevents the appliance from operating safely and requires troubleshooting to restore normal function.

Book a Repair Ask an Expert
Quick Diagnostics
Signs 7 identified
Possible Causes 9 listed
Safety Checks 10 steps
If unsure, stop using the appliance and contact a certified technician immediately.
What you notice

Signs

7
  • 01
    • Oven fails to heat or maintain temperature
  • 02
    • Display shows E1 error code and beeps repeatedly
  • 03
    • Heating elements do not activate when oven is turned on
  • 04
    • Oven locks and will not allow cooking functions to start
  • 05
    • Range may shut down unexpectedly during preheating
  • 06
    • Temperature display shows unusual or fluctuating readings
  • 07
    • Unable to select cooking modes or adjust temperature settings
Why it happens

Possible Causes

9
A
• Faulty oven temperature sensor (RTD probe) disconnected or damaged
B
• Loose or corroded electrical connections at sensor terminals
C
• Defective control board failing to read sensor signals correctly
D
• Wiring harness damaged between sensor and control module
E
• Moisture or mineral buildup on sensor due to steam or spills
F
• Power supply voltage fluctuation affecting sensor circuit (120V/240V line issues)
G
• Shorted heating element creating false sensor readings
H
• Defective thermal fuse or safety thermostat triggered
I
• Control panel calibration error after power surge
DIY — No disassembly

Safety Checks You Can Do

10
  1. 1
    • Check your home's circuit breaker for the range circuit and ensure it is in the ON position; flip the breaker OFF then back ON if tripped
  2. 2
    • Inspect the oven interior for any visible water, steam condensation, or food debris and allow the range to air dry for 30 minutes
  3. 3
    • Ensure the oven door is fully closed and latches properly
  4. 4
    • Review the control panel settings and verify no child lock or special mode is activated
  5. 5
    • Allow the range to cool completely (at least 30 minutes) before attempting to use it again
  6. 6
    • Perform a hard reset by switching off the dedicated circuit breaker for the range for 60 seconds, then switch it back ON
  7. 7
    • Check that all cookware has been removed from the oven and stovetop
  8. 8
    • Verify the range is properly grounded and all visible power connections are secure
  9. 9
    • If error persists after reset, unplug the range from the outlet for 5 minutes, then reconnect and test again
  10. 10
    • Contact a certified Bertazzoni service technician if error code E1 continues to display after these steps
Always unplug the appliance before performing any physical check. These are visual/external checks only.
Still having trouble?

Our certified technicians diagnose and fix this error code permanently.

Schedule a Repair Call Us Now