Error Detected May 1, 2026
Error Code

Bertazzoni Dishwasher Error Code PF

The PF error code indicates a power failure or electrical supply interruption on your Bertazzoni dishwasher. This error typically means the appliance experienced a loss of power during operation or failed to maintain proper electrical connection.

Book a Repair Ask an Expert
Quick Diagnostics
Signs 6 identified
Possible Causes 8 listed
Safety Checks 10 steps
If unsure, stop using the appliance and contact a certified technician immediately.
What you notice

Signs

6
  • 01
    • Dishwasher stops mid-cycle and displays PF error code on control panel
  • 02
    • Cycle does not resume automatically after power is restored
  • 03
    • Lights on the control panel may flicker or dim
  • 04
    • No response when pressing control buttons
  • 05
    • Dishwasher fails to start a new cycle
  • 06
    • Water remaining in tub from interrupted cycle
Why it happens

Possible Causes

8
A
• Tripped circuit breaker or blown fuse on the 120V household circuit serving the dishwasher
B
• Loose electrical connection at the wall outlet or dishwasher power cord
C
• Faulty electrical outlet not providing consistent 120V power supply
D
• Power surge or voltage fluctuation in home electrical system
E
• Defective power cord with internal damage or loose connections
F
• Control board electrical malfunction or component failure
G
• Insufficient voltage delivery to the appliance due to overloaded circuit
H
• Damaged or corroded electrical connections at terminal block inside dishwasher
DIY — No disassembly

Safety Checks You Can Do

10
  1. 1
    • Check your home's electrical panel and verify the circuit breaker for the dishwasher is in the ON position; if tripped, switch it OFF then back ON
  2. 2
    • Inspect the power cord at the back of the dishwasher for visible damage, cuts, or pinching
  3. 3
    • Ensure the dishwasher is fully plugged into the outlet with no loose connections
  4. 4
    • Test the outlet by plugging in another appliance (such as a lamp) to confirm power is reaching it
  5. 5
    • Unplug the dishwasher or turn off its circuit breaker and wait 60 seconds, then restore power to reset the control board
  6. 6
    • Check that no other high-draw appliances (oven, dryer, air conditioner) are running simultaneously on the same circuit
  7. 7
    • Clean around the outlet area to remove any dust or debris that could interfere with the connection
  8. 8
    • If you have a voltage meter available, verify the outlet is providing standard 120V power
  9. 9
    • Ensure the dishwasher door is fully closed and latched, as an open door can interrupt power to certain circuits
  10. 10
    • Review your recent power history—ask neighbors if they experienced outages, which may indicate utility-side issues
Always unplug the appliance before performing any physical check. These are visual/external checks only.
Still having trouble?

Our certified technicians diagnose and fix this error code permanently.

Schedule a Repair Call Us Now