Error Detected May 1, 2026
Error Code

Bertazzoni Freezer Error Code PF

The PF error code on Bertazzoni freezers sold in the USA indicates a power failure or power supply issue. This error typically means the freezer has detected an interruption in power delivery or an electrical problem with the appliance's power circuit.

Book a Repair Ask an Expert
Quick Diagnostics
Signs 7 identified
Possible Causes 9 listed
Safety Checks 11 steps
If unsure, stop using the appliance and contact a certified technician immediately.
What you notice

Signs

7
  • 01
    • Freezer displays PF error code on the digital control panel
  • 02
    • Freezer stops cooling or cycles on and off unexpectedly
  • 03
    • Interior lights flicker or fail to illuminate
  • 04
    • Compressor does not run or runs intermittently
  • 05
    • Digital display appears dim or unresponsive
  • 06
    • Freezer beeps or sounds an alarm when powered on
  • 07
    • Food temperature rises above safe freezing levels
Why it happens

Possible Causes

9
A
• Circuit breaker trip due to power surge or overload on the 120V electrical circuit
B
• Loose or damaged power cord connection at the wall outlet
C
• Faulty wall outlet not providing consistent 120V power
D
• Internal power supply board malfunction or failed capacitor
E
• Tripped GFCI (Ground Fault Circuit Interrupter) outlet in the electrical line
F
• Temporary power interruption in the home's electrical service
G
• Damaged power cord or frayed wiring
H
• Voltage fluctuation or unstable electrical supply in the home
I
• Failed thermal overload protector on the compressor circuit
DIY — No disassembly

Safety Checks You Can Do

11
  1. 1
    • Check your home's circuit breaker panel and reset any tripped breakers serving the freezer outlet, then restore power
  2. 2
    • Inspect the power cord for visible damage, fraying, or kinks and ensure it is fully inserted into the wall outlet
  3. 3
    • Test the wall outlet by plugging in another working appliance to confirm it is supplying power
  4. 4
    • If using a GFCI outlet, press the RESET button on the outlet itself to restore power
  5. 5
    • Verify the freezer door is fully closed and the door latch engages properly
  6. 6
    • Clear any obstructions blocking the door from closing completely
  7. 7
    • Ensure the freezer's ventilation vents on the back or sides are not blocked by dust or debris
  8. 8
    • Check that the freezer is not positioned against a wall that restricts airflow
  9. 9
    • Perform a full power reset by switching off the freezer's power, waiting 60 seconds, then switching it back on
  10. 10
    • Avoid using extension cords or power strips; plug the freezer directly into a wall outlet
  11. 11
    • Consult your home's electrical panel or contact a licensed electrician if you suspect unstable power supply
Always unplug the appliance before performing any physical check. These are visual/external checks only.
Still having trouble?

Our certified technicians diagnose and fix this error code permanently.

Schedule a Repair Call Us Now