Error Detected May 1, 2026
Error Code

Bertazzoni Ranges Error Code F1

Error code F1 on Bertazzoni ranges sold in the USA typically indicates a temperature sensor malfunction or failure in the oven cavity. This error prevents the oven from operating safely as it cannot accurately monitor cooking temperatures.

Book a Repair Ask an Expert
Quick Diagnostics
Signs 7 identified
Possible Causes 8 listed
Safety Checks 9 steps
If unsure, stop using the appliance and contact a certified technician immediately.
What you notice

Signs

7
  • 01
    • Oven fails to heat or reaches incorrect temperatures
  • 02
    • Error code F1 displays on the control panel
  • 03
    • Oven will not start or accept cooking commands
  • 04
    • Digital display may flicker or show inconsistent readings
  • 05
    • Cooking times are significantly longer than expected
  • 06
    • Range beeps repeatedly when attempting to use the oven
  • 07
    • Only stovetop burners may function while oven is disabled
Why it happens

Possible Causes

8
A
• Damaged or faulty oven temperature sensor (RTD or thermistor probe)
B
• Loose or corroded electrical connections to the temperature sensor
C
• Broken wiring harness between sensor and control board
D
• Control board failure preventing proper sensor signal reading
E
• Thermal sensor positioned incorrectly after cleaning or service
F
• Moisture or food debris affecting sensor accuracy
G
• Electrical surge damage to temperature sensing circuit
H
• Manufacturing defect in USA-spec 240V heating element control system
DIY — No disassembly

Safety Checks You Can Do

9
  1. 1
    • Turn off power to the range at the circuit breaker for 60 seconds, then restore power to reset the appliance
  2. 2
    • Check that the circuit breaker for the range has not tripped; reset if necessary
  3. 3
    • Allow the oven to cool completely before attempting to restart
  4. 4
    • Verify the control panel is dry and free from moisture or spills
  5. 5
    • Ensure no cookware or objects are blocking oven vents or sensors
  6. 6
    • Check that all control knobs and buttons are functioning smoothly without sticking
  7. 7
    • For induction cooktop models, verify cookware is ferromagnetic and compatible
  8. 8
    • Review the user manual to confirm proper oven preheat procedures
  9. 9
    • If error persists after reset, the temperature sensor likely requires professional replacement by a certified Bertazzoni technician
Always unplug the appliance before performing any physical check. These are visual/external checks only.
Still having trouble?

Our certified technicians diagnose and fix this error code permanently.

Schedule a Repair Call Us Now